RGB LED support
-
does the duet wifi support RGB LED's ? if so is there a link i can go to to help me attach some
if not will it support normal led's so they can be turned on and off from the web interface ?
-
You can connect LED strips to spare fan and heater outputs, and control them using M42.
-
just normal leds? not Digital RGB
-
M42 switches a specific pin on and off so you can use 3 pins to control one RGB led with external FETs or 3 uncommited on board FETs to drive them directly. See:
https://duet3d.com/wiki/Using_servos_and_controlling_unused_I/O_pinsDigitally addressable LEDs would require additional functionality to be added to firmware.
-
M42 switches a specific pin on and off so you can use 3 pins to control one RGB led with external FETs or 3 uncommited on board FETs to drive them directly. See:
https://duet3d.com/wiki/Using_servos_and_controlling_unused_I/O_pinsDigitally addressable LEDs would require additional functionality to be added to firmware.
yea i thought so.
im just gonna solder up some standard led's in a strip as i also need to control the power supply yet. and i may need the fan controllers for other stuff
thanks