Is this delta height map acceptable?
-
Hi,
Is the attached delta height map acceptable or do I need to continue working on my printer?
0_1536111888990_heightmap B.txt
Also when mesh compensation is enabled does that effect movements made using the DWC?
Thanks.
Frederick
-
@fcwilt said in Is this delta height map acceptable?:
when mesh compensation is enabled does that effect movements made using the DWC?
Yes I believe it does. It will keep the nozzle the set distance away from the bed based on the results of the heightmap.
As for whether that heightmap is acceptable for a delta, I cannot say.
-
I would consider that acceptable for printing with a first layer height of 0.2mm or greater.
-
@dc42 said in Is this delta height map acceptable?:
I would consider that acceptable for printing with a first layer height of 0.2mm or greater.
Thanks.
It's the best result I've had so far but I still cannot print much beyond 30-40 mm out from the center.
I will keep working.
Frederick