The usual doubt ... fans
-
Well...
after the issues with the fuse, i have changed 2 fans, think they are problematic...
But.... I can not configure them
I have 3 fans, 1 to Heatskin and 2 layers fans:
The HEATSKIN fan are conected to Duet Board, in Fan0 Socket, and layer FANS are connected to FAN1 and FAN2.... This the phisical connections.
In Config.g, i have:
; GCODE FAN
M106 P0 H-1; Layer 01
M106 P1 H-1; Layer 02
M106 P2 S1 I0 T40 H1; El del HeatskinThe problem.... something its wrong
When i restart Duet... 1 layer fan, power on, the other NO.
When try to calibrate temperature, Heatskin fan DONT power on.
By DWC, i can power on/off all 3 fans.
I have erased config.old.Whats wrong?
-
did you map all the fans to the tool?
see
https://duet3d.dozuki.com/Wiki/Gcode#Section_M563_Define_or_remove_a_tool -
@peirof said in The usual doubt ... fans:
M106 P0 H-1; Layer 01
You haven't included S0 in that command to make sure that the fan is turned off.