Firmware work with COREXYZ ?
-
I have seen this coreXYZ : Core-xyz first motion with modded Repetier firmware!
The Duet firmware works with this topology ?
-
@pipersw It looks like M669 will need to be extended to allow for the matrix to work with COREXYZ
https://duet3d.dozuki.com/Wiki/Gcode#Section_M669_Set_kinematics_type_and_kinematics_parameters
-
@t3p3tony said in Firmware work with COREXYZ ?:
@pipersw It looks like M669 will need to be extended to allow for the matrix to work with COREXYZ
https://duet3d.dozuki.com/Wiki/Gcode#Section_M669_Set_kinematics_type_and_kinematics_parameters
No need to extend M669, you can already specify whatever matrix you like.