Linear Rail mod...
-
Hi,
I have finished of mod my delta printer, a Tevo Little Monster.... I have installed linear rails.... Chinese linear rails, tweaked, for smooth displacement...
And can say without doubts, its the best mod I have do to the printer, after Duet, of course...
Before mod, I have ripples in surface... I supposed to why was dificult to adjusts escentric wheels of carriages... Whith linear rails, ripples has gone
I only have do 2 prints... But are very good... This evening I attach images of the mod, and results..
-
When I upgraded my large Kossel from wheeled carriages to linear rails, I saw a big reduction in calibration deviation.
-
Hi...
In my case... Deviation its lower, think remember 0,2 mmm.. Only that height map in compensation show waves... After send photos
-
hi....
Image of bed compensation heighmap AFTER linear rail Mod:
Its very good.... but i have to say that before mod, results are better.
Image of bed compensation heightmap BEFORE linear rail Mod, stock carriages:
I have to say, that results BEFORE they were strangely good...