Problem G02/G03 commands DuetWiFiFirmware-1.17e

  • I was trying to use my printing system as a laser engraver using the Inkscape Laser Tool Plug-In.
    This program outputs a gcode with G01 and G02/G03 commands.
    Currently, I am using a Duet Wifi so I installed the DuetWiFiFirmware-1.17e which includes the G02/G03 commands recognition.
    However, the machine was not responding as I was expecting. Then I erased the Duet Wifi and installed everything again, without success.
    So I tried the following code the find the problem. For now, I just used a pencil to plot the movement.

    G01 X10 Y25
    G02 X10 Y25 I20 J0 F125

    In my case the X -axis is mirrored which should not matter in my opinion.

    And when trying:
    G01 X10 Y25
    G03 X10 Y25 I20 J0 F125

    It gave the response shown in the blue dotted line.

    As I understand the G02/G03 commands, the machine should start its circular motion directly at X10 Y25 instead of moving to the Y25+ radius first.
    Is there a way this problem can be solved?

  • administrators

    Please can you check that image link because it doesn't work for me.

  • Is it visible now?

  • administrators

    Yes, it's visible now. I'll try that out tomorrow.

  • Is there any progress on the G2/G3 commands?

Log in to reply