EndStop Issue: LED dim/flickers, False homing, Help?



  • D300VS Delta.
    I've attempted to fix by replacing switch and sinch up the wires involved.

    The LED on the board is dim/ not fully on/off, making it impossible to home.
    I've attempted disconnecting/reconnecting the switch, which sometimes can get it to perform as intended, but can also go back to a dim state at random.

    Help? Suggestions?


  • administrators

    Is the endstop a microswitch, or some other type? If it's a microswitch then the most likely cause of the problem is a bad crimp connection in the cable.


Log in to reply