Cooling fan duct smart effector
-
Hello guys, i'm new, i have a delta printer with smart effector and Haydn Huntley’s magnetic arm. I'm looking for a better cooling solution, since i print mostly PLA and this duct does not work very well... I've also tried some duct from thingiverse but nothing that is compact and efficient.
On my previous setup (no smart effector) i used 2 radial 5015 and they worked very well, so if there is something based on these duct i'll be happy to try. -
Till today i have not found a good design with 1 radial fan that won't cut the print area...if you have some advice i'll appreciate a lot
-
Try this one, https://www.thingiverse.com/thing:2584364