Wrong size (solved)
-
Tried printing a 200x210mm size print and the printer cut off corners
have my Tronxy X5s set to 300X x 300Y but when i ask it to go to 300 x 300 it only goes to X205 and Y200.. if i ask it to go further... it wont do it..
i tried looking in the files for 205 and 200 values but cant find anything.. and can find the max set to 300 x 300 x 400 like it should be...
anyone have a explanation and a solution?
-
Check your M208 commands in config.g.
-
; Axis Limits
M208 X0 Y0 Z0 S1 ; Set axis minima
M208 X300 Y300 Z400 S0 ; Set axis maxima -
phaedrux found another m208 in config that overrided the previous settings.. deleted and now works properly
-
@kamikaze_freak said in Wrong size (solved):
phaedrux found another m208 in config that overrided the previous settings.. deleted and now works properly
Maybe English isn't your first language, but "overrode" is the correct tense here.
(Tell me to ***** if you don't care one way or the other; I just have a problem with bad grammar.)