Print rendering problem.
-
Hello everyone,
I need some little advice ... I just built a Corexy. It works pretty well, I just calibrated with it. However, I am confronted with a problem of rendering, I explain myself, when I print this STL the quotation is faithful except at the level of the lettering of top ... I play nice with the settings of Simplify 3D ( Extrusion Multiplier, Extrusion Width, Retraction Distance, Retraction Speed ) nothing do not change. Once my impression finished, my rendering is not terrible (see photo). I use a HotEnd E3D V6 and Titan deported in 1.75 with a nozzle of 0.4 (real) and I have the impression that my whole sending too much filament despite days to seek the right settings, it's as if my nozzle probed the lettering detail (prints it at 190 ° C). When, as I compare my impressions made with a BQ Hephestos. The rendering is much thinner as well as the rendering of the lettering. Yet the settings of S3D are identical except for the retraction, because I'm with a direct extruder ... Do you have an idea, a tip ... thank you.
Sorry for my very basic English ...