Duet3D Logo

    Duet3D
    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    PART COOLING FANS

    Duet Hardware and wiring
    2
    2
    143
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • swrightlast
      swrightlast last edited by swrightlast

      I have 2 blower type fans running on my part cooler. Should I make separate wire runs to the board, or can I gang them together and run one 2-wire lead to the board?

      1 Reply Last reply Reply Quote 0
      • fcwilt
        fcwilt last edited by

        I have to 40x20 blowers "ganged" together - they don't draw that much current.

        As long as the total current draw doesn't exceed the Duet rating and the voltage drop over the wires connecting the fans to the Duet is acceptable all should work fine.

        Frederick

        Printers: A FT-5 with the 713 upgrade bits. A custom MarkForged style. A small Utilmaker style and a CoreXY from kits. Various hotends. Using Duets (2 and 3) running 3.4.1

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA