Navigation

    Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Duet 2 Wifi-smart effector pins

    Duet Hardware and wiring
    2
    6
    103
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Tomson
      Tomson last edited by Tomson

      Hi
      Any one know what exactly pins i need to duet and smart effector ?
      I bought unfinished delta project (a lad making it sadly passed away and got it from his wife)
      I got plugs but not all the pins so im going to order pins and complete printer
      Thanks

      Ok got it 🙂
      So i got all shells and few wurth pins left
      For smart effector i need molex microfit 3 female pins 🙂
      Any one know if duet sells bags of wurth pins on its own ?

      1 Reply Last reply Reply Quote 0
      • Tomson
        Tomson last edited by

        So it seams to molex micro fit type plugs for smart effector are a wurth electronics and molex pins dont match ☹

        dc42 1 Reply Last reply Reply Quote 0
        • dc42
          dc42 administrators @Tomson last edited by dc42

          @Tomson said in Duet 2 Wifi-smart effector pins:

          So it seams to molex micro fit type plugs for smart effector are a wurth electronics and molex pins dont match ☹

          That's right. Use shells and crimp pins from the same manufacturer, Molex or Wurth. The 8-pin connector is Molex KK or compatible, the 6-pin connector is Molex Microfit 3.

          1 Reply Last reply Reply Quote 0
          • Tomson
            Tomson last edited by Tomson

            @dc42 I bought wurth pins for molex kk style shells as was have a few pins in wurth bag, thats work great together
            but for 6 pin and 2 pins i bought molex microfit pins and dosent match
            after ripping my hairs off my head id notice that black shells got WE writings so i assume i got all shells from wurth
            By the way its ur delta design printer 🙂

            1 Reply Last reply Reply Quote 0
            • Tomson
              Tomson last edited by Tomson

              Ok so after looking at cad model and drawings of connector pins should be compatible
              So verry carefully did crimp them again and it works, cheapo crimping tool i think its to blame
              U can pull out crimped cable by loads of force destroying pins btw
              So another question
              I got screened cables so why not to make a use of it ?
              Since duet dont have dedicated point for it where will be best point to connect screen ?
              Frame ?

              dc42 1 Reply Last reply Reply Quote 0
              • dc42
                dc42 administrators @Tomson last edited by

                @Tomson said in Duet 2 Wifi-smart effector pins:

                Since duet dont have dedicated point for it where will be best point to connect screen ?

                Frame, or a ground pin on the Duet.

                1 Reply Last reply Reply Quote 0
                • First post
                  Last post
                Unless otherwise noted, all forum content is licensed under CC-BY-SA