Duet 2 Wifi-smart effector pins



  • Hi
    Any one know what exactly pins i need to duet and smart effector ?
    I bought unfinished delta project (a lad making it sadly passed away and got it from his wife)
    I got plugs but not all the pins so im going to order pins and complete printer
    Thanks

    Ok got it 🙂
    So i got all shells and few wurth pins left
    For smart effector i need molex microfit 3 female pins 🙂
    Any one know if duet sells bags of wurth pins on its own ?



  • So it seams to molex micro fit type plugs for smart effector are a wurth electronics and molex pins dont match ☹


  • administrators

    @Tomson said in Duet 2 Wifi-smart effector pins:

    So it seams to molex micro fit type plugs for smart effector are a wurth electronics and molex pins dont match ☹

    That's right. Use shells and crimp pins from the same manufacturer, Molex or Wurth. The 8-pin connector is Molex KK or compatible, the 6-pin connector is Molex Microfit 3.



  • @dc42 I bought wurth pins for molex kk style shells as was have a few pins in wurth bag, thats work great together
    but for 6 pin and 2 pins i bought molex microfit pins and dosent match
    after ripping my hairs off my head id notice that black shells got WE writings so i assume i got all shells from wurth
    By the way its ur delta design printer 🙂



  • Ok so after looking at cad model and drawings of connector pins should be compatible
    So verry carefully did crimp them again and it works, cheapo crimping tool i think its to blame
    U can pull out crimped cable by loads of force destroying pins btw
    So another question
    I got screened cables so why not to make a use of it ?
    Since duet dont have dedicated point for it where will be best point to connect screen ?
    Frame ?


  • administrators

    @Tomson said in Duet 2 Wifi-smart effector pins:

    Since duet dont have dedicated point for it where will be best point to connect screen ?

    Frame, or a ground pin on the Duet.


Log in to reply