Second nozzle offset in polar printer



  • Hi everyone.✋

    I have a polar printer with two nozzles. I set second nozzle offset in X axis to 60mm.

    ; Tools
    M563 P0 S"Extruder 0" D0 H1 F0 ; define tool 0
    G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
    G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C
    M563 P1 S"Extruder 1" D1 H2 F-1 ; define tool 1
    G10 P1 X60 Y0 Z0 ; set tool 1 axis offsets
    G10 P1 R0 S0 ; set initial tool 1 active and standby temperatures to 0C

    When i started test print with second nozzle (print was a circle) printer printed somethink like "flower".I don't have any ideas how to set offset in polar printer.
    Is it posible or i have to remove my second extruder ? I realy need this extruder.


Log in to reply