Endstop error
-
@lacs2711 said in Endstop error:
sorry
M115
22.10.39M115
FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.0(RTOS) ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2018-06-05b3That version is too old to understand G1 H commands. I recommend you upgrade to 2.04.
-
OKI will try it tomorrow. thank you so much.
-
This guide may help you in your testing. The Ender 5 and the Ender 3 are basically the same setup.
https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+3:+Commissioning/39