G32 Error: Some computed corrections
matesz last edited by
I need some help. My machine gave me a error code while mesh leveling;
G32 Error: Some computed corrections exceed configured limit of 0.50mm: 1.503 -1.669
I successful finished some print before.
This is a new for me. Whats wrong?
Thar message isn't produced by mesh bed compensation, it is produced when G32 is used to adjust bed tilt using multiple leadscrews. See https://duet3d.dozuki.com/Wiki/Gcode?revisionid=HEAD#Section_M671_Define_positions_of_Z_leadscrews_or_bed_levelling_screws in particular the S parameter.