resume.g not executed

  • If i pause the print (over DWC or PanelDue) and restart the file resume.g is not executed.
    What can cause this?

    Board: Duet WiFi 1.02 or later + DueX2
    Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.0 (2020-01-03b3)
    Version von Duet WiFi Server: 1.23

  • Which firmware are you using?

  • Check basics first:

    • Must be in /sys
    • Must be named exactly "resume.g"
    • Try putting an M117 "this is resume.g" in the file, to see if it really is/isn't being executed.
    • Is pause.g being executed?
    • How are you resuming? DWC?

Log in to reply