Controlling LED light's Fan2 external momentary switch
-
Hello,
i would like to use fan2 for controling my 12V DC LED cob lights. and i want to control when are on with external momentary switch and with buttom on web interface. momentary switch i have connected to 5v and to GPIO1.
I was looking at the g-code to be able to figurit out but with out succes . please help.Matej
-
Hello, @dc42 please help
i have for now wrote that
on weree nd of program
external momentary switch i have connected to 5V and GPIO1; Controling LED COB lights M950 P7 C"duex.fan8" Q0 M950 J1 C"duex.gp1" M581 P1 S1 T2 C0
and this is in trigger2.g in macros:
;trigger2.g M42 P7 S1
one more question is than between printing possible to use macros or this external momentary switch to turn led on or off?
-
You originally said that Fan2 would control the cob lights. This would give you a button and value slider on DWP
Fan2 is on the main board not the expansion.
M950 F2 C"Fan2" Q500 ; create System fan on pin fan2 and set its frequency
M106 P2 C"Cob Light" ; set System fan. Thermostatic electronics coolingHope that helps, not sure how to trigger from a momentary switch though