Navigation

    Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Z max trigger stop z probe dive

    Duet Hardware and wiring
    2
    4
    55
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • jphilly
      jphilly last edited by

      Is it possible to disable the z probe (on minimum) dive when the zmax endstop is triggered? I want to avoid damage/misalignment of the z screws when it's already at max without knowing it. It seems like it'd be possible with the conditionals in 3.01 but that's still rc.

      1 Reply Last reply Reply Quote 0
      • Phaedrux
        Phaedrux Moderator last edited by

        I just leave 3mm of clearance so that even when it's at Zmax it can still drop through the optical endstop for z probe homing.

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • jphilly
          jphilly last edited by

          It's not a problem of going through the endstop; it can pass clear through. Say the screws are 1mm away from the end when I turn it off or hit the estop. I want it to be able to read the zmax to know if it should dive or not to keep the screws from bottoming out when it doesn't know where z is. Currently I have it move to the zmax before homing but that is a rather time consuming solution.

          1 Reply Last reply Reply Quote 0
          • jphilly
            jphilly last edited by

            G1 H1 F240 Z5 does what I want. (besides a feedrate change just a move type change from the generated home configs is all that was needed)

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA