Sudden Issue with Driver 1, but Can't move any Axis
-
Yesterday I got my new Maestro board online and driving my printer around. Everything worked beautifully. All axes driven correctly, endstops, heater and fans all running smoothly.
When I powered it up today, everything seemed fine, but when I tried to home all axes, it just sat there. Eventually, I got a "homing failed" error, which seems to just be a timeout.
I did some more digging and found a string of "Error: over temperature shutdown reported by driver(s) 1" in the console.
When I give an M122 command, the following section seems to confirm an issue with driver 1:
MCU temperature: min 27.8, current 38.6, max 39.2 Supply voltage: min 0.0, current 23.0, max 23.1, under voltage events: 0, over voltage events: 0, power good: yes Driver 0: ok, read errors 0, write errors 0, ifcount 0, reads 0, timeouts 9799 Driver 1: standstill, read errors 0, write errors 0, ifcount 6, reads 9793, timeouts 0 Driver 2: ok, read errors 0, write errors 0, ifcount 0, reads 0, timeouts 9798 Driver 3: ok, read errors 0, write errors 0, ifcount 0, reads 0, timeouts 9798 Driver 4: ok, read errors 0, write errors 0, ifcount 0, reads 0, timeouts 9798 Driver 5: ok, read errors 0, write errors 0, ifcount 0, reads 0, timeouts 9798 Driver 6: ok, read errors 0, write errors 0, ifcount 0, reads 0, timeouts 9798I am trying to disable driver 1, which I believe is Y axis by default, with the following config edit:
; Drives M569 P0 S1 ; physical drive 0 goes forwards M569 P1 R-1 ;S0 ; physical drive 1 goes backwards M569 P2 S0 ; physical drive 2 goes backwards M569 P3 S1 ; physical drive 3 goes forwards M584 X0 Y4 Z2 E3 ; set drive mappingBut I still can't move any axis, and the M122 report looks the same. It seems like a replacement board is in my future, but I'd love to find a configuration workaround that lets me get some more testing done.
Thanks!
-
