Dead PanelDue 7I
-
I received the new PanelDue I ordered today, came up as it should have.
At least I can be certain that the Wifi board itself does not have anything going on with it that would prevent the PanelDue from doing its job. -
An update. As I was preparing for brain surgery on this thing it has been sitting in its Anti Static bag for the last at least 48 hours.
Decided to plug it into the computer (same cable, was still plugged into the computer) and that is when i heard that lovely ba-da-bing sound. The computer recognized it and it showed up as a a Bossa port. I was able to flash it.
Currently the printer is mid print, so I cannot install it to verify that it works fully.
Either way, for anyone with a possibly similar situation, letting it sit for a while, and possibly in the anti static bag may be helpful. -
Thats good news! I think Ian suggested something like that, which interesting to see working!
Now you just need another Duet board to go with the replacement;)
-
The nice thing is that i have another board. Was going to down the line get a duet 5 for it since its a small printer, but it will be a small printer with a big display.
-
@MikeD said in Dead PanelDue 7I:
it has been sitting in its Anti Static bag for the last at least 48 hours
Hey! That was my fix! Glad it's working. Not sure this has ever worked before. Must have been a cosmic ray that flipped a bit somewhere...
@MikeD said in Dead PanelDue 7I:
Was going to down the line get a duet 5
You'll have to wait a while for Duet 5, we've only just got to Duet 3!
Ian