Maestro Mounting & Cooling Concept
-
Hey guys,
I'm gearing up to replace the simple mounting standoffs with this design I am working on. It will provide 15mm of standoff height, serve as a mounting platform for an 80mm fan, keep airflow contained under the board, and offer some cable management as well.
Any suggestions on room for improvement or areas of concern?
-
Looks good. You are correctly cooling the drivers from the "bottom" of the board. I use a similar, somewhat less fancy, setup on my big Delta with a Duet2 Wifi.
I'm sure you can imagine the rest, just from this:
-
May want to ensure there's enough space to get the SD card out if you need (it looks like there might be clearance already)
-
@nhof said in Maestro Mounting & Cooling Concept:
May want to ensure there's enough space to get the SD card out if you need (it looks like there might be clearance already)
Good call!
There was just barely enough room (16mm space, for a 15mm long SD). I went ahead and added 5mm more for easier access.