Workflow: Tuning and tweaking

[taconite]

Hey guys,

so just for curiosity when you get yourself a new printer (bought or self built) what is your workflow for:

a: dialing in the settings for your printer
b: dialing in the settings for each new material

I will add "my" workflow soon

Maybe this topic will help "noobies" to turn the correct screws when new to the whole 3D printing thing

[zapta]

This is the official commissioning guide

https://duet3d.dozuki.com/Wiki/Step_by_step_guide

[Phaedrux]

There's also the commissioning and calibration sections of this guide: https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+3:+Commissioning/39?lang=en

And here for more indepth: https://forum.duet3d.com/topic/14250/tuning-jerk-accel-speed-settings/2?_=1585767493956