Any Command to close Duet2 wifi's 2660 SPI
netuser last edited by
I want to use 9 external motors in Duet2 wifi, now i can get 5 through breakout borad and 2 through CONN-LCD
but not enough ..
I want to use main board's E/D/S , but E signal doesn't works because 2660 works with SPI mode , I know it's not good to use this..
So.. Other way to use external motors with main board, or how to close 2660 SPI ..
To disable TMC2660 drivers on the main board, you would need to modify the firmware source code to force variable numSmartDrivers to the value you want, then compile it yourself.