Slow response to recover set temperature after secondary fan switched
-
I have now completed an auto tune of the hot end "M303 H1 P0.15 S210 "
This is the result
Heater 1 model: gain 568.0, time constant 185.4, dead time 14.0, max PWM 1.00, in use: yes, mode: PID
Setpoint change: P4.2, I0.02, D40.8
Load change: P4.2, I0.15, D40.8However, when the hot end reached the set temperature, I switched on my secondary cooling fan at 50% speed and the hot end temperature dropped dramatically and took a long time to recover.
How can I improve the response time of the heater?