heating tool0 to maestro
-
Circuit: Duet Maestro 1.0
Firmware: RepRapFirmware for Duet 2 Maestro 3.0 (2020-01-03b3)Hello, when I put the tool 0 (head) in heating, the head moves at the coordinates X = 0 Y = -130 Z = 280 and all the other actions are blocked.
Thank you in advance for your help.
-
What do you have in your tpre0.g and tpost0.g files in /sys on the SD card?
-
@dc42 said in heating tool0 to maestro:
What do you have in your tpre0.g and tpost0.g files in /sys on the SD card?
Hello, in tpre0.g there was "G91 - G1 Z10 X0 Y-130 F9000 - G903".
I changed Y-130 to Y0 and it works.
thank you so much -
@dc42 Sorry, I spoke too quickly.
it works in standby but not when it is active
In Tpost0.g i have "M116 P0"