Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    4.3" blank after upgrade

    PanelDue
    4
    6
    65
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Chriss
      Chriss last edited by

      HI *,

      I received my PaneDue 4.3" today. My first reflex was to update the firmware, bad decision.
      I followed the instruction from "https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update" and I used "https://github.com/dc42/PanelDueFirmware/releases/download/1.24/PanelDue-v2-4.3.bin" because I want to use it on a Duet 2.
      The result was a blank screen. I tried "https://github.com/dc42/PanelDueFirmware/releases/download/1.24/PanelDue-v3-4.3.bin" which worked but this is the wrong version.

      My understanding is that I need to use "v2" because of the mainboard, right? Not because of the Firmware version.

      I tried the "verify" function in "Bossa" which confirmed that the FW is fine.

      Any ideas?

      Cheers, Chriss

      elmoret 1 Reply Last reply Reply Quote 0
      • A Former User
        A Former User last edited by

        are you resetting the panel after the flashing? (i prefer the command line version with -R to deal with it for me)

        Chriss 1 Reply Last reply Reply Quote 0
        • elmoret
          elmoret @Chriss last edited by

          @Chriss “My understanding is that I need to use "v2" because of the mainboard, right? ”

          No.

          1 Reply Last reply Reply Quote 0
          • Chriss
            Chriss @Guest last edited by

            @bearer Yes, I reseted the display after the flashing. Btw: I have the same problem with the oder firmware too. It works with v3 but not with v2. I may test the command line version tomorrow.

            So if the v2/3 is indicating the firmware and not the board, should I upgrade my board to v3. The board is still on my desk, it will serve a cr10s pro v2 sooner or later, so I do not loose anything.

            Cheers, chriss

            1 Reply Last reply Reply Quote 0
            • Phaedrux
              Phaedrux Moderator last edited by

              The V2 and V3 in this context refers to the version of PanelDue you have. It has nothing to do with the Duet board at all. If this is a new unit, it's most likely a V3.

              PanelDue v3.0 4.3" PanelDue-v3-4.3.bin

              That's your bin file to use. Go through the flashing steps again carefully.

              Z-Bot CoreXY Build | Thingiverse Profile

              Chriss 1 Reply Last reply Reply Quote 0
              • Chriss
                Chriss @Phaedrux last edited by

                @Phaedrux Thanks.... That made it clear. My understanding was wrong. :m I guess that somebody may like to make that point clear at the documentation. The filename is a bit confusing for a newbie.

                Cheers, Chriss

                1 Reply Last reply Reply Quote 0
                • First post
                  Last post
                Unless otherwise noted, all forum content is licensed under CC-BY-SA