M203 Units



  • Hi,

    Using Duet WiFi Firmware 2.05.1 Wifi Server 1.23 DWC 2.0.7

    Why does M203 alone return the current values in units different from what you use when setting the values?

    Thanks.

    Frederick


  • administrators

    For historical reasons the values passed in the M203 command are passed in mm/min (same as the G1 F parameter). However, most 3D printer users find it more natural to think in mm/sec. That's why I changed M203 to report mm/sec. I would be happy to change it back of users prefer that.


Log in to reply