Duet3D Logo

    Duet3D
    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Paused a print, Cannot resume. Duet Crashed

    General Discussion
    2
    2
    46
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • PaulHew
      PaulHew last edited by

      Seems like my day for faults!
      Kicked a print off this evening, made sure first layers went down well. 2 Objects

      Popped back after 2 hours and one had come unstuck.
      Hit the pause buuton on the Panel Due and it paused.

      Noticed on the Panel Due it did not come back with 'print paused' OR give me the option to resume the print.
      Thought I could use M496 to cancel the failed part.

      Opened DWC on a computer.
      This is the M122

      m122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.1.1 running on Duet Ethernet 1.02 or later + DueX5
Board ID: 08DGM-917DA-G4MS8-6JKDL-3SN6N-TVVB9
Used output buffers: 1 of 24 (14 max)
=== RTOS ===
Static ram: 27980
Dynamic ram: 94860 of which 52 recycled
Exception stack ram used: 552
Never used ram: 7628
Tasks: NETWORK(ready,324) HEAT(blocked,1224) DUEX(suspended,160) MAIN(running,1640) IDLE(ready,80)
Owned mutexes:
=== Platform ===
Last reset 02:24:14 ago, cause: software
Last software reset at 2020-06-15 21:45, reason: User, spinning module GCodes, available RAM 8124 bytes (slot 0)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task MAIN
Error status: 8
MCU temperature: min 34.7, current 38.4, max 39.7
Supply voltage: min 24.1, current 24.2, max 24.3, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: standstill, SG min/max 0/1023
Driver 1: standstill, SG min/max 0/1023
Driver 2: standstill, SG min/max not available
Driver 3: standstill, SG min/max 0/1023
Driver 4: standstill, SG min/max not available
Driver 5: standstill, SG min/max 0/1023
Driver 6: standstill, SG min/max 0/1023
Driver 7: standstill, SG min/max 0/1023
Driver 8: standstill, SG min/max not available
Driver 9: standstill, SG min/max not available
Date/time: 2020-06-16 00:09:52
Cache data hit count 4294967295
Slowest loop: 141.16ms; fastest: 0.14ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 3.0ms, write time 11.8ms, max retries 0
=== Move ===
Hiccups: 0(0), FreeDm: 169, MinFreeDm: 107, MaxWait: 228721ms
Bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves: 177637, completed moves: 177637, StepErrors: 0, LaErrors: 0, Underruns: 0, 0  CDDA state: 0
=== AuxDDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0  CDDA state: -1
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
Heater 0 is on, I-accum = 0.1
Heater 1 is on, I-accum = 0.5
=== GCodes ===
Segments left: 0
Movement lock held by Aux
HTTP is doing "M24" in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 20
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 110.89ms; fastest: 0.02ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 1 of 8
Interface state active, link 100Mbps full duplex
=== DueX ===
Read count 1, 0.01 reads/min
16/06/2020, 00:09:52 	M24
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.1.1 running on Duet Ethernet 1.02 or later + DueX5
Board ID: 08DGM-917DA-G4MS8-6JKDL-3SN6N-TVVB9
Used output buffers: 1 of 24 (14 max)
=== RTOS ===
Static ram: 27980
Dynamic ram: 94860 of which 52 recycled
Exception stack ram used: 552
Never used ram: 7628
Tasks: NETWORK(ready,324) HEAT(blocked,1224) DUEX(suspended,160) MAIN(running,1640) IDLE(ready,80)
Owned mutexes:
=== Platform ===
Last reset 02:24:14 ago, cause: software
Last software reset at 2020-06-15 21:45, reason: User, spinning module GCodes, available RAM 8124 bytes (slot 0)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task MAIN
Error status: 8
MCU temperature: min 34.7, current 38.4, max 39.7
Supply voltage: min 24.1, current 24.2, max 24.3, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: standstill, SG min/max 0/1023
Driver 1: standstill, SG min/max 0/1023
Driver 2: standstill, SG min/max not available
Driver 3: standstill, SG min/max 0/1023
Driver 4: standstill, SG min/max not available
Driver 5: standstill, SG min/max 0/1023
Driver 6: standstill, SG min/max 0/1023
Driver 7: standstill, SG min/max 0/1023
Driver 8: standstill, SG min/max not available
Driver 9: standstill, SG min/max not available
Date/time: 2020-06-16 00:09:52
Cache data hit count 4294967295
Slowest loop: 141.16ms; fastest: 0.14ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 3.0ms, write time 11.8ms, max retries 0
=== Move ===
Hiccups: 0(0), FreeDm: 169, MinFreeDm: 107, MaxWait: 228721ms
Bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves: 177637, completed moves: 177637, StepErrors: 0, LaErrors: 0, Underruns: 0, 0  CDDA state: 0
=== AuxDDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0  CDDA state: -1
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
Heater 0 is on, I-accum = 0.1
Heater 1 is on, I-accum = 0.5
=== GCodes ===
Segments left: 0
Movement lock held by Aux
HTTP is doing "M24" in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 20
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 110.89ms; fastest: 0.02ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 1 of 8
Interface state active, link 100Mbps full duplex
=== DueX ===
Read count 1, 0.01 reads/min

      Looked at Job Status, had the Pause only available.
      Clicked and then no more functions possible from DWC

      Pressed 'Stop' on Panel Due and board rebooted.

      Not sure what is going on here.

      Hope someone can shed light on it.

      Regards
      Paul

      RailCore II - Duet Mini + 1LC, Voron V0.1 - Duet Mini
      Voron 2.4 disassembled..... Waiting for the RailCore Mini....

      1 Reply Last reply Reply Quote 0
      • Phaedrux
        Phaedrux Moderator last edited by

        Not sure what it could be but if it does happen again please share another M122 report for @dc42 to see.

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA