IO configuration
-
Hi
Have a duet3 board in transit and looking through documentation before it arrives.
For the life of me I canot find information on how to set up inputs and outputs.
I have found start here guides, calibration, configuration of machine, wiring guides.
Lists of available io. But nothing to asinine this device to that terminal?Can someone point me in the right direction to get started
,
Cheers -
simplest approach is https://configtool.reprapfirmware.org/
or for misc i/o look to https://duet3d.dozuki.com/Wiki/Gcode#Section_M950_Create_heater_fan_or_GPIO_servo_pin and https://duet3d.dozuki.com/Wiki/Using_servos_and_controlling_unused_IO_pins
-
Great thanks
To simple