Is it possible to operate an AC servo motor using a DUET board?
-
Mitsubishi 1KW servo motor (3EA) and 0.75KW servo motor (1EA) will be operated to manufacture large-sized POLAR 3D PRINTER.
-
What servo controllers do they have, if they have STEP/DIR inputs then you can control them with a Duet. you may need some voltage level shifting in between to match the voltages.
Best to post the datasheet for the servo controller.
-
Does DUET not support CW/CCW?
-
No, most controllers that have an input for CW/CCW and also set that input to be Step/Dir.
-
ClockWise / ConterClockWise ??
Thats just the "Dir"=Direction Signal or are there any other Standards?Anyway, @MRJEON if your Servo Driver has an Step and Direction input and not Analog +10/-10V or any other of the various control signals out there, your good.
You will need a Duet Expansion Breakout Board