Settings for Running Bed Mesh?
deonholt last edited by
Hi and thank you for your help.
Ender 5 Pro with BL Touch.
Printable Bed size: 220 x 220
Anyone care to help me setting this up?
At the moment mine it set to start at 0mm and end at 190mm for X & Y with a 20mm spacing. (This is how I got it from the person installing the Duet 2 WiFi for me.)
But, as you would know, it misses a couple of probes because the BLT cannot reach some points.
On the other hand I think it probes too many times. I'm looking for about 3 x 3 probes but cannot get it dialed in.
I will appreciate some help with this. Thanks.
Veti last edited by
post your config and other files