topic_solved paneldue 3.2 screen not refreshing after macro is run
apak last edited by
I have a macro to preheat bed and nozzle to a desire temp.
With previous fw, I just run it, and the screen info updated while heating.
but with paneldue 3.2, it just does not update screen info until macro is finished.
M104 S150 ; set extruder temp M140 S60 ; set bed temp M190 S60 ; wait for bed temp M109 S150 ; wait for extruder temp
@apak This is a known issue with RepRapFirmware 3.2-beta2 and will be fixed in 3.2-beta3.