Duet2 Wifi PSU

R3play

Hi,

I'm thinking about replacing my PSU since it's just to big for my likings and the fan is way to loud on it.

But since I'm not a huge expert in electrical stuff I tought I just ask here for some help.
I'm thinking of buying a 24V 15A power supply, will this be enough?

Running:
Duet2 Wifi
About 4 fans (1 Duet Wifi cooler, PSU fan, E3D v6 cooling fan and a part cooling fan)
5 E3D stepper motors (Compact But Powerful motor ,

Step Angle: 0.9°
Rated Current: 1.68A
Body length: 40mm
Faceplate: NEMA 17
Motor cable length: 1m)

Original E3D V6
BLTouch

220*220mm 24V Magnetic Heated bed
(According to the seller it's a 120W Heated Bed)

pipersw

I run a similar config but with a 400W 24V bed, and a MeanWell 500W PSU without issue.
You just have to heat up the bed before all others actions.

So I think it's enough IF you buy a good PSU, and not a noname.

Veti

@R3play
that looks fine

here is a guide on how to calculate it.
https://duet3d.dozuki.com/Wiki/Choosing_the_power_supply