Maestro 2
-
I am finally getting in to convert my Ender 3 Pro over the my Maestro 2 board from the Creality 4.2.2 board. I picked up a basic crimping tool and realized that this may not work. Which type of tool do I need? Molex, Dupont or what? This is for the pins that you buy in the Duet kit.
-
Take a look at this guide. It has some links to some specific tool recommendations.
https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+1:+Wiring/37#s113