SOLVED Out vs io.out
Donpi last edited by
I have the blTouch on IO_7 and a fan on OUT7.
Is it normal that when I deploy the probe it starts the fan ?
No, that's not normal. IO7.out is completely separate from OUT7.
Donpi last edited by Donpi
@dc42 Ok I found what is appening.
The problem is not between IO_7.out and OUT7.
But between IO_7.out and OUT4.
In OUT4 I have a LED strip, with I declare like that on pin 0.
M950 P0 C"out4" Q500
And my blTouche is declared like taht on servo 0.
M950 S0 C"io5.out"
The real problem ( if we say there is one) is between servo and pin when they have the same ID. In my case servo 0 and pin 0.
Of course I solved this changing my pin's ID.
Thanks for clarifying that. I have update the documentation for M950 to clarify that servo pins are just GPIO pins with a different default PWM frequency. I will mark this as solved.