Extrusion factor?

  • Sooo yeah, i forgot to adjust the multiplier in my slicer before exporting and starting the print. And ofcourse i didn't see this before it had gone an hour or two.

    So well, would adjusting the extrusion factor on the paneldue or dwc to 90% mimic having the extrusion multiplier set to 0.9 in the slicer? (the gcode was sliced with the multiplier set to 1 just for reference).

  • yes thats how i understand it

  • Yeah it looks like it judging by the print as well 🤕

Log in to reply