3.2 DSF: "File: Out-of-order reply"

TypQxQ

Using 3.2 on 6HC+3HC+SBC. Started print and it stuck on my homing macro. I include a long debug so nothing is missed.
His usually works without problems.

[debug] Waiting for execution of M32 "0:/gcodes/Front Stepper v5.2 - Bottom.gcode"
[debug] Processing M32 "0:/gcodes/Front Stepper v5.2 - Bottom.gcode"
[info] Selected file /opt/dsf/sd/gcodes/Front Stepper v5.2 - Bottom.gcode
[debug] Waiting for finish of M32 "0:/gcodes/Front Stepper v5.2 - Bottom.gcode" => File 0:/gcodes/Front Stepper v5.2 - Bottom.gcode selected for printing
[info] Starting file print
[debug] Waiting for execution of G10 P0 R200 S200 ; sets the standby temperature
[debug] Processing G10 P0 R200 S200 ; sets the standby temperature
[debug] Waiting for finish of G10 P0 R200 S200 ; sets the standby temperature
[debug] Waiting for execution of ; generated by SuperSlicer 2.3.55 on 2021-01-16 at 23:00:27 UTC
[debug] Processing ; generated by SuperSlicer 2.3.55 on 2021-01-16 at 23:00:27 UTC
[debug] Waiting for finish of ; generated by SuperSlicer 2.3.55 on 2021-01-16 at 23:00:27 UTC
[debug] Waiting for execution of ; 
[debug] Processing ; 
[debug] Waiting for finish of ; 
[debug] Waiting for execution of ; external perimeters extrusion width = 0.40mm
[debug] Processing ; external perimeters extrusion width = 0.40mm
[debug] Waiting for finish of ; external perimeters extrusion width = 0.40mm
[debug] Waiting for execution of ; perimeters extrusion width = 0.50mm
[debug] Processing ; perimeters extrusion width = 0.50mm
[debug] Waiting for finish of ; perimeters extrusion width = 0.50mm
[debug] Waiting for execution of ; infill extrusion width = 0.50mm
[debug] Processing ; infill extrusion width = 0.50mm
[debug] Waiting for finish of ; infill extrusion width = 0.50mm
[debug] Waiting for execution of ; solid infill extrusion width = 0.50mm
[debug] Processing ; solid infill extrusion width = 0.50mm
[debug] Waiting for finish of ; solid infill extrusion width = 0.50mm
[debug] Waiting for execution of ; top infill extrusion width = 0.40mm
[debug] Processing ; top infill extrusion width = 0.40mm
[debug] Waiting for finish of ; top infill extrusion width = 0.40mm
[debug] Waiting for execution of ; first layer extrusion width = 0.42mm
[debug] Processing ; first layer extrusion width = 0.42mm
[debug] Waiting for finish of ; first layer extrusion width = 0.42mm
[debug] Waiting for execution of ; object:{"name":"Front Stepper v5","id":"Front Stepper v5.2 - Bottom.stl id:0 copy 0","object_center":[250.000000,250.000000,0.000000],"boundingbox_center":[250.000000,250.000000,26.315001],"boundingbox_size":[82.299988,106.585815,52.630001]}
[debug] Processing ; object:{"name":"Front Stepper v5","id":"Front Stepper v5.2 - Bottom.stl id:0 copy 0","object_center":[250.000000,250.000000,0.000000],"boundingbox_center":[250.000000,250.000000,26.315001],"boundingbox_size":[82.299988,106.585815,52.630001]}
[debug] Waiting for execution of ; plater:{"center":[250.000000,250.000000,0.000000],"boundingbox_center":[250.000000,250.000000,26.315001],"boundingbox_size":[82.299988,106.585815,52.630001]}
[debug] Waiting for execution of ;TYPE:Custom
[debug] Waiting for execution of ; custom gcode: start_gcode
[debug] Waiting for execution of G10 P0 R0 S0 ; Don't heat the tools yet
[debug] Waiting for execution of G10 P1 R0 S0 ; Don't heat the tools yet
[debug] Waiting for finish of ; object:{"name":"Front Stepper v5","id":"Front Stepper v5.2 - Bottom.stl id:0 copy 0","object_center":[250.000000,250.000000,0.000000],"boundingbox_center":[250.000000,250.000000,26.315001],"boundingbox_size":[82.299988,106.585815,52.630001]}
[debug] Processing ; plater:{"center":[250.000000,250.000000,0.000000],"boundingbox_center":[250.000000,250.000000,26.315001],"boundingbox_size":[82.299988,106.585815,52.630001]}
[debug] Waiting for finish of ; plater:{"center":[250.000000,250.000000,0.000000],"boundingbox_center":[250.000000,250.000000,26.315001],"boundingbox_size":[82.299988,106.585815,52.630001]}
[debug] Waiting for execution of G10 P2 R0 S0 ; Don't heat the tools yet
[debug] Processing ;TYPE:Custom
[debug] Waiting for execution of M140 S60 ; Heat the bed first
[debug] Waiting for finish of ;TYPE:Custom
[debug] Processing ; custom gcode: start_gcode
[debug] File: Sent G10 P0 R200 S200 ; sets the standby temperature, remaining space 1488, needed 48
[debug] Waiting for finish of ; custom gcode: start_gcode
[debug] File: Sent ; first layer extrusion width = 0.42mm, remaining space 1420, needed 68
[debug] Processing G10 P0 R0 S0 ; Don't heat the tools yet
[debug] Waiting for finish of G10 P0 R0 S0 ; Don't heat the tools yet
[debug] Processing G10 P1 R0 S0 ; Don't heat the tools yet
[debug] Waiting for finish of G10 P1 R0 S0 ; Don't heat the tools yet
[debug] Processing G10 P2 R0 S0 ; Don't heat the tools yet
[debug] Waiting for execution of M116 H0 S2 ; Wait for the bed to reach its temperature +-2 degC.
[debug] Waiting for finish of G10 P2 R0 S0 ; Don't heat the tools yet
[debug] Waiting for execution of G10 P0 R175 S220 ; Set temperature for the first tool used.
[debug] Processing M140 S60 ; Heat the bed first
[debug] Waiting for finish of M140 S60 ; Heat the bed first
[debug] Processing M116 H0 S2 ; Wait for the bed to reach its temperature +-2 degC.
[debug] Waiting for finish of M116 H0 S2 ; Wait for the bed to reach its temperature +-2 degC.
[debug] Waiting for execution of M98 P"/sys/custom/Conditional_HomeAll.g" ; Only home if not already homed.
[debug] Processing G10 P0 R175 S220 ; Set temperature for the first tool used.
[debug] Waiting for finish of G10 P0 R175 S220 ; Set temperature for the first tool used.
[debug] Processing M98 P"/sys/custom/Conditional_HomeAll.g" ; Only home if not already homed.
[debug] Waiting for finish of M98 P"/sys/custom/Conditional_HomeAll.g" ; Only home if not already homed.
[debug] Waiting for execution of G0 Z5 F5000 ; Ensure nozzle is at 5mm over the bed
[debug] Processing G0 Z5 F5000 ; Ensure nozzle is at 5mm over the bed
[debug] Waiting for finish of G0 Z5 F5000 ; Ensure nozzle is at 5mm over the bed
[debug] Waiting for execution of T0 ; Mount extruder first used (even if only one extruder used). Waits for temperature inside the script.
[debug] Processing T0 ; Mount extruder first used (even if only one extruder used). Waits for temperature inside the script.
[debug] Waiting for finish of T0 ; Mount extruder first used (even if only one extruder used). Waits for temperature inside the script.
[debug] Waiting for execution of ; custom gcode end: start_gcode
[debug] Processing ; custom gcode end: start_gcode
[debug] Waiting for finish of ; custom gcode end: start_gcode
[debug] Waiting for execution of G21 ; set units to millimeters
[debug] Processing G21 ; set units to millimeters
[debug] Waiting for finish of G21 ; set units to millimeters
[debug] Waiting for execution of G90 ; use absolute coordinates
[debug] Processing G90 ; use absolute coordinates
[debug] Waiting for finish of G90 ; use absolute coordinates
[debug] Waiting for execution of M83 ; use relative distances for extrusion
[debug] Processing M83 ; use relative distances for extrusion
[debug] Waiting for finish of M83 ; use relative distances for extrusion
[debug] Waiting for execution of ; custom gcode: start_filament_gcode
[debug] Processing ; custom gcode: start_filament_gcode
[debug] Waiting for finish of ; custom gcode: start_filament_gcode
[debug] Waiting for execution of ; Filament gcode
[debug] Waiting for execution of ; custom gcode end: start_filament_gcode
[debug] Processing ; Filament gcode
[debug] Waiting for finish of ; Filament gcode
[debug] Waiting for execution of ;LAYER_CHANGE
[debug] Processing ; custom gcode end: start_filament_gcode
[debug] Waiting for execution of ;Z:0.3
[debug] Waiting for finish of ; custom gcode end: start_filament_gcode
[debug] Waiting for execution of ;HEIGHT:0.3
[debug] Processing ;LAYER_CHANGE
[debug] Waiting for finish of ;LAYER_CHANGE
[debug] Processing ;Z:0.3
[debug] Waiting for finish of ;Z:0.3
[debug] Processing ;HEIGHT:0.3
[debug] Waiting for finish of ;HEIGHT:0.3
[debug] File: Suspending code G10 P0 R200 S200 ; sets the standby temperature
[debug] File: Suspending code ; first layer extrusion width = 0.42mm
[debug] Macro file start.g not found
[debug] File: Disposing macro file start.g
[debug] File: Sent G10 P0 R200 S200 ; sets the standby temperature, remaining space 1488, needed 48
[debug] File: -> Resumed suspended code
[debug] File: Sent ; first layer extrusion width = 0.42mm, remaining space 1420, needed 68
[debug] File: -> Resumed suspended code
[debug] File: Sent G10 P0 R0 S0 ; Don't heat the tools yet, remaining space 1372, needed 48
[debug] File: Sent G10 P1 R0 S0 ; Don't heat the tools yet, remaining space 1324, needed 48
[debug] File: Sent G10 P2 R0 S0 ; Don't heat the tools yet, remaining space 1276, needed 48
[debug] File: Sent M140 S60 ; Heat the bed first, remaining space 1244, needed 32
[debug] File: Sent M116 H0 S2 ; Wait for the bed to reach its temperature +-2 degC., remaining space 1204, needed 40
[debug] File: Sent G10 P0 R175 S220 ; Set temperature for the first tool used., remaining space 1156, needed 48
[debug] File: Sent M98 P"/sys/custom/Conditional_HomeAll.g" ; Only home if not already homed., remaining space 1088, needed 68
[debug] File: Sent G0 Z5 F5000 ; Ensure nozzle is at 5mm over the bed, remaining space 1048, needed 40
[debug] File: Sent T0 ; Mount extruder first used (even if only one extruder used). Waits for temperature inside the script., remaining space 1024, needed 24
[debug] File: Sent G21 ; set units to millimeters, remaining space 1000, needed 24
[debug] File: Sent G90 ; use absolute coordinates, remaining space 976, needed 24
[debug] File: Sent M83 ; use relative distances for extrusion, remaining space 952, needed 24
[debug] File: Sent ;LAYER_CHANGE, remaining space 908, needed 44
[debug] File: Sent ;HEIGHT:0.3, remaining space 864, needed 44
[debug] Completed M32 "0:/gcodes/Front Stepper v5.2 - Bottom.gcode" => File 0:/gcodes/Front Stepper v5.2 - Bottom.gcode selected for printing
[debug] IPC#853: Connection closed
[debug] G10 P0 R200 S200
[debug] Completed G10 P0 R200 S200 ; sets the standby temperature => 
[debug] Completed ; generated by SuperSlicer 2.3.55 on 2021-01-16 at 23:00:27 UTC
[debug] Completed ; 
[debug] Completed ; external perimeters extrusion width = 0.40mm
[debug] Completed ; perimeters extrusion width = 0.50mm
[debug] Completed ; infill extrusion width = 0.50mm
[debug] Completed ; solid infill extrusion width = 0.50mm
[debug] Completed ; top infill extrusion width = 0.40mm
[debug] G10 P0 R200 S200
[debug] Waiting for execution of G1 E-0.50000 F3000.00000
[debug] Completed ; first layer extrusion width = 0.42mm
[debug] Processing G1 E-0.50000 F3000.00000
[debug] Completed ; plater:{"center":[250.000000,250.000000,0.000000],"boundingbox_center":[250.000000,250.000000,26.315001],"boundingbox_size":[82.299988,106.585815,52.630001]}
[debug] Waiting for finish of G1 E-0.50000 F3000.00000
[debug] Completed ; custom gcode: start_gcode
[debug] Completed G10 P0 R0 S0 ; Don't heat the tools yet => 
[debug] Completed ;TYPE:Custom
[debug] Completed ; object:{"name":"Front Stepper v5","id":"Front Stepper v5.2 - Bottom.stl id:0 copy 0","object_center":[250.000000,250.000000,0.000000],"boundingbox_center":[250.000000,250.000000,26.315001],"boundingbox_size":[82.299988,106.585815,52.630001]}
[debug] G10 P0 R0 S0
[debug] Waiting for execution of G1 Z0.350000 F18000.000
[debug] Processing G1 Z0.350000 F18000.000
[debug] Completed G10 P1 R0 S0 ; Don't heat the tools yet => 
[debug] Waiting for finish of G1 Z0.350000 F18000.000
[debug] G10 P1 R0 S0
[debug] Waiting for execution of G1 X209.977 Y198.059
[debug] Waiting for execution of G1 E0.50000 F1800.00000
[debug] Processing G1 X209.977 Y198.059
[debug] Completed G10 P2 R0 S0 ; Don't heat the tools yet => 
[debug] Waiting for finish of G1 X209.977 Y198.059
[debug] Processing G1 E0.50000 F1800.00000
[debug] Waiting for finish of G1 E0.50000 F1800.00000
[debug] Waiting for execution of ;TYPE:Skirt
[debug] Waiting for execution of G1 X212.132 Y196.103 E0.12648
[debug] Waiting for execution of G1 X214.377 Y194.468 E0.12072
[debug] Waiting for execution of G1 X216.798 Y193.069 E0.12155
[debug] Waiting for execution of G1 X219.300 Y191.952 E0.11908
[debug] Waiting for execution of G1 X220.807 Y191.424 E0.06944
[debug] Waiting for execution of G1 X223.321 Y190.756 E0.11304
[debug] Processing ;TYPE:Skirt
[debug] Waiting for execution of G1 X224.861 Y190.477 E0.06806
[debug] Waiting for execution of G1 X227.411 Y190.213 E0.11144
[debug] Waiting for execution of G1 X250.157 Y190.174 E0.98868
[debug] Waiting for execution of G1 X251.308 Y190.263 E0.05018
[debug] Waiting for execution of G1 X252.377 Y190.512 E0.04775
[debug] G10 P2 R0 S0
[debug] Completed M140 S60 ; Heat the bed first => 
[debug] Completed G10 P0 R175 S220 ; Set temperature for the first tool used. => 
[debug] Waiting for finish of ;TYPE:Skirt
[debug] Completed M116 H0 S2 ; Wait for the bed to reach its temperature +-2 degC. => 
[debug] Processing G1 X212.132 Y196.103 E0.12648
[debug] Waiting for finish of G1 X212.132 Y196.103 E0.12648
[debug] Processing G1 X214.377 Y194.468 E0.12072
[debug] Waiting for finish of G1 X214.377 Y194.468 E0.12072
[debug] Processing G1 X216.798 Y193.069 E0.12155
[debug] Waiting for finish of G1 X216.798 Y193.069 E0.12155
[debug] Processing G1 X219.300 Y191.952 E0.11908
[debug] Waiting for finish of G1 X219.300 Y191.952 E0.11908
[debug] Processing G1 X220.807 Y191.424 E0.06944
[debug] Waiting for finish of G1 X220.807 Y191.424 E0.06944
[debug] Processing G1 X223.321 Y190.756 E0.11304
[debug] Waiting for finish of G1 X223.321 Y190.756 E0.11304
[debug] Processing G1 X224.861 Y190.477 E0.06806
[debug] Waiting for finish of G1 X224.861 Y190.477 E0.06806
[debug] Processing G1 X227.411 Y190.213 E0.11144
[debug] Waiting for finish of G1 X227.411 Y190.213 E0.11144
[debug] Processing G1 X250.157 Y190.174 E0.98868
[debug] Waiting for finish of G1 X250.157 Y190.174 E0.98868
[debug] Processing G1 X251.308 Y190.263 E0.05018
[debug] Waiting for finish of G1 X251.308 Y190.263 E0.05018
[debug] G10 P0 R175 S220
[debug] Waiting for execution of G1 X253.446 Y190.936 E0.04996
[debug] File: Suspending code T0 ; Mount extruder first used (even if only one extruder used). Waits for temperature inside the script.
[debug] Waiting for execution of G1 X254.301 Y191.423 E0.04278
[debug] File: Suspending code G21 ; set units to millimeters
[debug] File: Suspending code G90 ; use absolute coordinates
[debug] Waiting for execution of G1 X255.163 Y192.084 E0.04721
[debug] File: Suspending code M83 ; use relative distances for extrusion
[debug] File: Suspending code ;LAYER_CHANGE
[debug] File: Suspending code ;HEIGHT:0.3
[info] Starting macro file /sys/custom/Conditional_HomeAll.g on channel File
[debug] File: ==> Starting code G0 Z5 F5000 ; Ensure nozzle is at 5mm over the bed
[debug] Completed M98 P"/sys/custom/Conditional_HomeAll.g" ; Only home if not already homed. => 
[debug] Processing G1 X252.377 Y190.512 E0.04775
[debug] Evaluating If block
[debug] Waiting for finish of G1 X252.377 Y190.512 E0.04775
[debug] Waiting for execution of G1 X255.968 Y192.922 E0.05052
[debug] Evaluating 0 on channel File
[debug] Processing G1 X253.446 Y190.936 E0.04996
[debug] Waiting for finish of G1 X253.446 Y190.936 E0.04996
[debug] Processing G1 X254.301 Y191.423 E0.04278
[debug] Waiting for finish of G1 X254.301 Y191.423 E0.04278
[debug] Processing G1 X255.163 Y192.084 E0.04721
[debug] Waiting for finish of G1 X255.163 Y192.084 E0.04721
[debug] Processing G1 X255.968 Y192.922 E0.05052
[debug] Waiting for finish of G1 X255.968 Y192.922 E0.05052
[debug] Requesting update of key job, seq 760 -> 762
[error] Failed to get macro response within 3000ms from SBC (channel File)
[warn] File: Out-of-order reply: 'Macro file /sys/custom/Conditional_HomeAll.g not found
'
[warn] File: Out-of-order reply: ''
[info] Macro file /sys/custom/Conditional_HomeAll.g not found
[warn] Macro file has been started on channel File but none was requested
[debug] Evaluating 1 on channel File
[debug] Updated key job
[debug] Evaluating 2 on channel File
[debug] Evaluating 3 on channel File
[debug] Evaluating !move.axes[0].homed || !move.axes[1].homed || !move.axes[2].homed || !move.axes[3].homed on channel File
[debug] Evaluation result: (!move.axes[0].homed || !move.axes[1].homed || !move.axes[2].homed || !move.axes[3].homed) = False
[debug] End of If block
[debug] Finished codes from macro file /sys/custom/Conditional_HomeAll.g
[info] Finished macro file /sys/custom/Conditional_HomeAll.g
[warn] Cannot set macro file finished because there is no file ID
[debug] IPC#854: Got new UNIX connection, checking permissions...

TypQxQ

Diag:

=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.2 running on Duet 3 MB6HC v0.6 or 1.0 (SBC mode)
Board ID: 08DJM-956L2-G43S4-6JKDD-3SJ6L-TB62G
Used output buffers: 1 of 40 (16 max)
=== RTOS ===
Static ram: 149788
Dynamic ram: 65316 of which 152 recycled
Never used RAM 143576, free system stack 128 words
Tasks: Linux(ready,71) HEAT(blocked,271) CanReceiv(blocked,809) CanSender(blocked,341) CanClock(blocked,352) TMC(blocked,19) MAIN(running,720) IDLE(ready,19)
Owned mutexes: HTTP(MAIN)
=== Platform ===
Last reset 06:39:54 ago, cause: software
Last software reset at 2021-01-16 17:37, reason: User, none spinning, available RAM 143816, slot 0
Software reset code 0x0012 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0x00000000 SP 0x00000000 Task Linu Freestk 0 n/a
Error status: 0x00
Aux0 errors 0,0,0
Aux1 errors 0,0,0
MCU temperature: min 38.4, current 45.5, max 46.3
Supply voltage: min 27.9, current 31.9, max 32.0, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.0, current 12.0, max 12.1, under voltage events: 0
Driver 0: position 159870, standstill, reads 2082, writes 36 timeouts 0, SG min/max 0/1023
Driver 1: position 0, standstill, reads 2082, writes 36 timeouts 0, SG min/max 0/1023
Driver 2: position 7282, standstill, reads 2027, writes 91 timeouts 0, SG min/max 0/162
Driver 3: position 0, standstill, reads 2083, writes 35 timeouts 0, SG min/max 0/455
Driver 4: position 0, standstill, reads 2083, writes 35 timeouts 0, SG min/max 0/834
Driver 5: position 0, standstill, reads 2083, writes 35 timeouts 0, SG min/max 0/658
Date/time: 2021-01-17 00:17:00
Slowest loop: 2999.36ms; fastest: 0.05ms
=== Storage ===
Free file entries: 10
SD card 0 not detected, interface speed: 37.5MBytes/sec
SD card longest read time 0.0ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 125, maxWait 13404166ms, bed compensation in use: mesh, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 2], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
Heater 0 is on, I-accum = 0.1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP* is doing "M122" in state(s) 0
Telnet is idle in state(s) 0
File* is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger* is idle in state(s) 0
Queue* is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== CAN ===
Messages queued 213300, send timeouts 0, received 288328, lost 0, longest wait 1ms for reply type 6018, free buffers 48
=== SBC interface ===
State: 4, failed transfers: 0
Last transfer: 1ms ago
RX/TX seq numbers: 22968/24073
SPI underruns 0, overruns 0
Number of disconnects: 0, IAP RAM available 0x2c8a8
Buffer RX/TX: 0/0-0
=== Duet Control Server ===
Duet Control Server v3.2.0
File:
Finishing macro /sys/custom/Conditional_HomeAll.g, started by G0 Z5 F5000 ; Ensure nozzle is at 5mm over the bed
> Next stack level
Suspended code: T0 ; Mount extruder first used (even if only one extruder used). Waits for temperature inside the script.
Suspended code: G21 ; set units to millimeters
Suspended code: G90 ; use absolute coordinates
Suspended code: M83 ; use relative distances for extrusion
Suspended code: ;LAYER_CHANGE
Suspended code: ;HEIGHT:0.3
Pending code: G1 E-0.50000 F3000.00000
Pending code: G1 Z0.350000 F18000.000
Pending code: G1 X209.977 Y198.059
Pending code: G1 E0.50000 F1800.00000
Pending code: G1 X212.132 Y196.103 E0.12648
Pending code: G1 X214.377 Y194.468 E0.12072
Pending code: G1 X216.798 Y193.069 E0.12155
Pending code: G1 X219.300 Y191.952 E0.11908
Pending code: G1 X220.807 Y191.424 E0.06944
Pending code: G1 X223.321 Y190.756 E0.11304
Pending code: G1 X224.861 Y190.477 E0.06806
Pending code: G1 X227.411 Y190.213 E0.11144
Pending code: G1 X250.157 Y190.174 E0.98868
Pending code: G1 X251.308 Y190.263 E0.05018
Pending code: G1 X252.377 Y190.512 E0.04775
Pending code: G1 X253.446 Y190.936 E0.04996
Pending code: G1 X254.301 Y191.423 E0.04278
Pending code: G1 X255.163 Y192.084 E0.04721
Pending code: G1 X255.968 Y192.922 E0.05052
Code buffer space: 4096
Configured SPI speed: 8000000 Hz
Full transfers per second: 42.28
Maximum length of RX/TX data transfers: 3720/1688
File /opt/dsf/sd/gcodes/Front Stepper v5.2 - Bottom.gcode is selected, processing

TypQxQ

After Canceling the print I tried restarting it but it says it is already printing.

2021-01-17 00:25:02	M32 "0:/gcodes/Front Stepper v5.2 - Bottom.gcode"
Error: M32: Cannot set file to print, because a file is already being printed
2021-01-17 00:20:49	Cancelled printing file 0:/gcodes/Front Stepper v5.2 - Bottom.gcode, print time was 0h 19m

Diag after trying to restart:

=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.2 running on Duet 3 MB6HC v0.6 or 1.0 (SBC mode)
Board ID: 08DJM-956L2-G43S4-6JKDD-3SJ6L-TB62G
Used output buffers: 1 of 40 (16 max)
=== RTOS ===
Static ram: 149788
Dynamic ram: 65316 of which 152 recycled
Never used RAM 143576, free system stack 128 words
Tasks: Linux(blocked,71) HEAT(blocked,271) CanReceiv(blocked,809) CanSender(blocked,341) CanClock(blocked,352) TMC(blocked,19) MAIN(running,720) IDLE(ready,19)
Owned mutexes: HTTP(MAIN)
=== Platform ===
Last reset 06:48:26 ago, cause: software
Last software reset at 2021-01-16 17:37, reason: User, none spinning, available RAM 143816, slot 0
Software reset code 0x0012 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0x00000000 SP 0x00000000 Task Linu Freestk 0 n/a
Error status: 0x00
Aux0 errors 0,0,0
Aux1 errors 0,0,0
MCU temperature: min 45.4, current 45.6, max 45.8
Supply voltage: min 31.9, current 31.9, max 32.0, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.0, current 12.0, max 12.1, under voltage events: 0
Driver 0: position 159870, standstill, reads 31841, writes 0 timeouts 0, SG min/max not available
Driver 1: position 0, standstill, reads 31841, writes 0 timeouts 0, SG min/max not available
Driver 2: position 9282, standstill, reads 31841, writes 0 timeouts 0, SG min/max not available
Driver 3: position 0, standstill, reads 31837, writes 4 timeouts 0, SG min/max 0/152
Driver 4: position 0, standstill, reads 31837, writes 4 timeouts 0, SG min/max 0/201
Driver 5: position 0, standstill, reads 31836, writes 4 timeouts 0, SG min/max 0/124
Date/time: 2021-01-17 00:25:32
Slowest loop: 77.73ms; fastest: 0.06ms
=== Storage ===
Free file entries: 10
SD card 0 not detected, interface speed: 37.5MBytes/sec
SD card longest read time 0.0ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 125, maxWait 2861714ms, bed compensation in use: mesh, comp offset 0.000
=== MainDDARing ===
Scheduled moves 2, completed moves 2, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
Heater 0 is on, I-accum = 0.1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP* is doing "M122" in state(s) 0
Telnet is idle in state(s) 0
File* is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger* is idle in state(s) 0
Queue* is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== CAN ===
Messages queued 2053, send timeouts 0, received 6149, lost 0, longest wait 1ms for reply type 6013, free buffers 48
=== SBC interface ===
State: 4, failed transfers: 0
Last transfer: 1ms ago
RX/TX seq numbers: 2343/3448
SPI underruns 0, overruns 0
Number of disconnects: 0, IAP RAM available 0x2c8a8
Buffer RX/TX: 0/0-0
=== Duet Control Server ===
Duet Control Server v3.2.0
File:
Finishing macro /sys/custom/Conditional_HomeAll.g, started by G0 Z5 F5000 ; Ensure nozzle is at 5mm over the bed
> Next stack level
Code buffer space: 4096
Configured SPI speed: 8000000 Hz
Full transfers per second: 3160.22
Maximum length of RX/TX data transfers: 3720/1688
File /opt/dsf/sd/gcodes/Front Stepper v5.2 - Bottom.gcode is selected, processing, paused, cancelled

DSF:

[debug] IPC#938: Received command SimpleCode
[debug] Waiting for execution of M32 "0:/gcodes/Front Stepper v5.2 - Bottom.gcode"
[debug] Processing M32 "0:/gcodes/Front Stepper v5.2 - Bottom.gcode"
[debug] Waiting for finish of M32 "0:/gcodes/Front Stepper v5.2 - Bottom.gcode" => Error: Cannot set file to print, because a file is already being printed
[debug] Completed M32 "0:/gcodes/Front Stepper v5.2 - Bottom.gcode" => Error: M32: Cannot set file to print, because a file is already being printed