issues with scale tool changer
BorisVivienne last edited by
So I've got a large scale tool changer, and I've been trying to get all my tool selection gcode tweaked to work really well.
So now that I've tested a tool selection, the machine goes through ""tpre0.g"" as it should, but doesn't actually change the status of tool from 0 to active.
And if I send another T0, the ""tpre0.g"" returns.
Running 3.1.1 on Duet 3 with 3 tool boards and two external drivers.
Post your config and tool files?
Also update to 3.2.2, including the tool boards.
SBC or standalone mode?