Paneldue 5i Blown?
-
I connected the screen on a Duet 2 Wifi board and it worked perfectly. Now connecting it to the Duet 3 on the io_0 port with cable adjustments as needed and firmware I think correct the screen does not turn on as in no power. Connecting to the PC via USB is the same result...but there had been no incidents so I am at a loss for why it is doing what it is doing.
M575 P1 S1 B57600 ; enable support for PanelDue - io_0 is what I am using . -
did you accidentally hit the erase button?
-
I intentionally hit the erase button a couple of times, but BOSSA cant see the comport.
-
If you look into the bottom edge of the display where the flexible PCB disappears into a slot in the metal, can you see the backlight LED lighting up?
-
There is no LED lighting up when plugging it into the PC.
-
Try a different cable and usb port?
