Duet Wifi V1.01 SD Card
I need to install firmware and configuration files on a SD card for my Duet Wifi V1.01. I have looked through a number of posts and have not had luck. Is there a nice, easy to follow, procedure for loading firmware/config files on the SD card? All posts I have come across have a number of links with a number of different configurations. Is there a zip file I can DL and cut and paste to the SD card to get started?
Here is a loose guide on getting a config set from the online tool, preparing the SD card, and flashing the firmware, and getting connected.
@Phaedrux Thank you for the info. I made progress but now I get a "Wifi module is being started" when I put in the M552 command. I used the link provided in the instructions and downloaded the Duet2Firmware-2.02b and put in the Duet2CombinedFirmware.bin and DuetWifiServer.bin into the sys folder on the SD card.
Able to follow instructions up the point where I need to put in my network name and PW using M587 command, but nothing happens. Wifi just stays in idle mode.
engikeneer last edited by
@paulyp45 This one may help more for setting up wifi access:
After you've added the wifi username & password with
M587, you then need to put the wifi module back into active mode by sending
Once you get connected to wifi and have access to DWC, upload these 3 zip files, one at a time in the system tab. Don't extract them. Reboot after each. Use M115 to verify the firmware has been applied.
That will get your firmware and DWC up to date.
For your config, might be a good idea to run through the configurator tool and generate a fresh set for RRF3.