Smart-Effector Z-Probe Status Turns Red-1000?
3mm last edited by
Since I added my homebrew flying effector and modified the DUET Smart-Effector linear rail adapters, (shortened bowden tube to about 6inches/152,4mm, from 80inches/203,2cm), my mostly homebrew delta printer is more or less behaving itself! Yeah!!
However I have a question. When I'm auto-cal'ing, I notice that the Z-Probe status indicator infrequently, as the nozzel touches the bed, it'll turn red with a 1000 depiction, while many of the other touch-downs remain 0 without the background changing to red. What does this represent? Is it an indication of something that needs to be remedied?
Thanks in advance...3mm
o_lampe last edited by
That's normal because DWC only polls data every n.n seconds. If the Z-probe really misses a probe, you get a warning or error in the console.