Uploading sys, macro and filament files all together
flobler last edited by flobler
I am wondering if it is possible to upload the following files all together in a single .zip:
I found this thread but it is from 2018 so I thought I´d check if support has been added: https://forum.duet3d.com/topic/7774/uploading-macros-sys-firmware-files-etc/7
For the Bear Project we are trying to make the start with Duet as easy as possible for our users. Many of those are coming from Prusa firmware which is very focused on usability and helping newcomers to 3d printing to get started without much knowledge or need to modify firmware, configs etc.
For this reason we want to limit the actions needed for someone to setup their Duet printer and to update configurations later, hence it would be nice being able to publish a single .zip file with everything needed to get going which then could be applied with a single upload.
If this is not possible, what would be the best way to submit this as an "enhancement request"? I have a few more in mind - all user experience focused - that I will be opening a separate thread for.
Edit: the board we plan to support is the Mini 5+
I think this should be possible with recent DWC version. Have you tried uploading a zip yet?
flobler last edited by
@phaedrux oh nice, thank you!
I have honestly not tried it yet but I have my second Mini arriving next week and planned to test this when I set it up. I will update here after.
It may have to be done in separate zip files. One for configs, one for firmware, and one for macros, uploaded to their respective places.