No movement when position command sent without G0/G1
Currently running dsf 3.2.2
Is anyone else having issues with no movements taking place when a G0/G1 command is left out? (G1 command was used in the previous line)
I remember this working with past versions but can't seem to get it working. For example a code would be:
The carriage would move to X250, but then no movement taking place after. I get a "check mark" X300 in the console but there's no physical movement or position update in the controller...
RepRapFirmware supports commands in that format, but only when switched into CNC mode using M453. I'm not certain whether DSF on the SBC does, I will find out.
Thanks! I am currently in CNC mode. Tried with a tool selected and no tools selected which results in the same "check mark X###" making it seem like it works.
@dc42 Any news on this?
@chrishamm is looking at it.