Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Duet 3 mini, RRF 3.2.2 - Error logfile? +DWC stopped.

    Using Duet Controllers
    3
    4
    57
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • CNCModeller
      CNCModeller last edited by

      Hi All,
      I woke this morning to find my printer paused with an error on the 12864 display but the error wasn't fully readable as it went off the right of the display. Something like "Too Much..." Or "Too high..." It was the middle of the night and I was half asleep when I checked the printer lol.

      It could be filament as I haven't calibrated it properly yet.

      By the looks of the print it was probably 3 or 4 hours in to a 20h test print.

      Unfortunately DWC also locked up, I was running one instance on my pc, and another on my phone.

      Is there a logfile on the SD I can look at to see what the error was that caused the pause?

      Is it likely the pause caused DWC to stop? Or am I looking at another fault?

      Also is there any way to trigger an alert on my phone for print errors?

      Any thoughts would be much appreciated.

      Many thanks
      Barry M

      Polar Printer Duet3 Mini + 1HCL
      https://youtube.com/playlist?list=PLWjZVEdMv1BY82izahK45qKh-hp3NFkix

      Wanhao D4S: Duet2
      https://forum.duet3d.com/post/296755

      Wanhao D5S & K40 Laser, Duet2 TBD
      https://www.youtube.com/CNCModellerUK

      DIY-O-Sphere 1 Reply Last reply Reply Quote 0
      • DIY-O-Sphere
        DIY-O-Sphere @CNCModeller last edited by DIY-O-Sphere

        @cncmodeller

        Check this:
        https://duet3d.dozuki.com/Wiki/Gcode#Section_M929_Start_stop_event_logging_to_SD_card

        Edit:
        Triggering would be possible e.g. with a node red flow.
        https://forum.duet3d.com/topic/18520/node-red-mobile-sized-status-dashboard-for-duet?_=1621839970014
        https://github.com/MintyTrebor/Duet-Node-Red-Dashboard

        (UTC+1)

        CNCModeller 1 Reply Last reply Reply Quote 0
        • CNCModeller
          CNCModeller @DIY-O-Sphere last edited by

          @diy-o-sphere said in Duet 3 mini, RRF 3.2.2 - Error logfile? +DWC stopped.:

          @cncmodeller

          Check this:
          https://duet3d.dozuki.com/Wiki/Gcode#Section_M929_Start_stop_event_logging_to_SD_card

          Edit:
          Triggering would be possible e.g. with a node red flow.
          https://forum.duet3d.com/topic/18520/node-red-mobile-sized-status-dashboard-for-duet?_=1621839970014
          https://github.com/MintyTrebor/Duet-Node-Red-Dashboard

          Thanks @DIY-O-Sphere , I'll check out the logging function.

          My home automation works with MQTT and OpenHab I think I already have a link to an MQTT interface somewhere, will have to check it out in more detail once the printer is fully operational again after its upgrade.

          Thanks again,
          Barry M

          Polar Printer Duet3 Mini + 1HCL
          https://youtube.com/playlist?list=PLWjZVEdMv1BY82izahK45qKh-hp3NFkix

          Wanhao D4S: Duet2
          https://forum.duet3d.com/post/296755

          Wanhao D5S & K40 Laser, Duet2 TBD
          https://www.youtube.com/CNCModellerUK

          1 Reply Last reply Reply Quote 0
          • Phaedrux
            Phaedrux Moderator last edited by

            You could gather an M122 if you haven't power cycled more than once to see if there's something useful in there for use to see.

            For monitoring there are a few options lists here: https://duet3d.dozuki.com/c/Community_Projects

            Z-Bot CoreXY Build | Thingiverse Profile

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA