What to do after setting up the web server
-
Hey guys
I got my duet3 mainboard setup for my printer today and have the web interface going and everything. All the features are top notch when compared to my creality which is bare-bones from the factory.
But now that I have the web interface and everything I am just wondering what to do from here? Most of the guides outline how to wire up and set up the SD but I need to now start configuring the firmware for my specific machine.
My printer is a dual extruder coreXY but I know that the firmware can't know that because I haven't entered this anywhere. Does anyone have any recommendations on guides or what I should do next to start configuring the firmware? Would be much appreciated.
-
Some possible next steps.
https://duet3d.dozuki.com/Wiki/Getting_Started_With_Duet_3
https://duet3d.dozuki.com/Wiki/ConfiguringRepRapFirmwareCoreXYPrinter
https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+3:+Commissioning/39
https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe
https://duet3d.dozuki.com/Wiki/Bed_levelling_using_multiple_independent_Z_motors
https://duet3d.dozuki.com/Wiki/Using_mesh_bed_compensation
https://duet3d.dozuki.com/Wiki/Pressure_advance