Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Solved Is their a macro which get called on job start ?

    General Discussion
    2
    2
    79
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • peter247
      peter247 last edited by peter247

      Hi , I have a set of heater bed cooling fans which in my cura end gcode I've added M106 P2 S1 H0 T30 .
      AND added M106 P2 S0 H-1 at the start of my cura start code, BUT you problem is this get executed after the bed and nozzle has reached temperature , so fans are on until the temperature reached and then switch off .

      Is there a macro which gets called first ?

      Ender 5 plus linear rail and hemera powered by duet 2 wifi , CR10s pro v1 with bltouch mostly stock , BLV mgn Cube slowly being built powered by duet 3 mini 5+

      fcwilt 1 Reply Last reply Reply Quote 0
      • fcwilt
        fcwilt @peter247 last edited by

        @peter247

        You can create a file called start.g which is called at the very beginning of a print.

        Frederick

        Printers: A FT-5 with the 713 upgrade bits. A custom MarkForged style. A small Utilmaker style and a CoreXY from kits. Various hotends. Using Duets (2 and 3) running 3.4.1

        1 Reply Last reply Reply Quote 1
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA