Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Any future updates for 1xd and 3hc expansion boards?

    Hardware wishlist
    2
    2
    126
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • aprz
      aprz last edited by

      Will there be updates for the 1xd and 3hc boards? I’m in need of higher voltage than the max 48v for 1xd and 32v for 3hc.

      T3P3Tony 1 Reply Last reply Reply Quote 0
      • T3P3Tony
        T3P3Tony administrators @aprz last edited by

        @aprz As it stands we are not planning on supporting higher than 48V on the 1XD. If your motors need >48V then you need to use a separate supply for the 1XD. If you have a brake on the motor then it may need 24V which would work for the 1XD as well.

        The 3HC is unlikely to have a change to >32V soon, but we are looking at maximum voltages for the boards that use the TMC2160 drivers to review the changes needed to go to 48V safely. Our closed loop board that uses a TMC2160 and is in beta uses a TMC 2160 and has a maximum input of 48V

        www.duet3d.com

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA