Omerod 2 Jerky circular movement
-
Hello,
=====================================
Omerod 2
Duet WiFi
OSX: Yosemite
Slice3r 1.2.9
Firmware Version: 1.15b (2016-08-25)On previous boards circles have been perfect. I am currently experiencing slighty jerky printing on circles and am wondering what possible configuration commands I should be looking at to compensate for this.
If anyone can point me in the right direction it would be appreciated.
BTW: If this is the wrong place to post this please let me know for future reference.
Regards,
Dennis..
-
1. Please confirm that you are printing from SD card.
2. Upgrade to latest firmware. A fix for high speed circles was implemented recently.
3. If that doesn't help, try increasing XY jerk in the M566 command in config.g.
-
Many Thanks dc42…
Updated the firmware to: 1.15e (2016-10-02) ( previously 1.15b)
This sorted the jerky circular movement issue out on my Omerod 2.