UNSOLVED No function after update

[Wladekcz]

Hello.
Extrusion Control does not work after the update.
Compensation & Calibration doesn't work either
Turning on the translation into Polish suspends the viewing of temperatures.
M122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.4.0 (2022-03-15 18:57:24) running on Duet 3 MB6HC v1.01 or later (standalone mode)

[fcwilt]

@wladekcz

3.4.1 is in the pre-release stage - perhaps it mentions some of the issues you are facing.

Frederick

[dc42]

@wladekcz which firmware version were you running previously?

Have you checked that you are also running version 3.4.0 of DWC?

[Phaedrux]

@wladekcz said in No function after update:

Extrusion Control does not work after the update.

It's most likely that the tool isn't selected. Do you have a T0 in your config.g?

@wladekcz said in No function after update:

Compensation & Calibration doesn't work either

What exactly doesn't work? Can you be more specific?

Perhaps you should try uploading the full 3.4 zip file to the system tab in DWC to ensure everything is actually up to date.

https://github.com/Duet3D/RepRapFirmware/releases/download/3.4.0/Duet2and3Firmware-3.4.0.zip